● Overview
RY series air-cooled heat conducting oil pump reasonable structure, excellent performance , reliable. Suitable for conveying solid particles in high-temperature liquid. RY series air-cooled heat conducting oil pump corrosion and temperature depends on the degree and major parts wetted material ( divided into three categories : 1.HT200; II.ZG230-450; III.1Cr18Ni9Ti, OCr18Ni12-Mo2Ti)
● Advantages and Features
RY series air-cooled heat conducting oil pump , advanced technology, high efficiency , long-term stable operation without leakage in the hot state , no additional cooling systems, the use of safe and reliable, in our heat carrier heating system has been widely used, has entered the industrial fields of petroleum , chemical, rubber , plastics, pharmaceuticals, textile, printing and dyeing , roads, food , RY series air-cooled heat conducting oil pump is mainly used for conveying solid particles of the weak decay of hot liquids , temperature ≤ 370 ℃, the circulation pump is an ideal . The HTF pump is widely used in high-temperature setting paper lunch boxes , dynamically vulcanized tire and reclaimed rubber machinery , vulcanizing , rubber , drying, feed drying , dyeing, chemical, plywood production, waterproofing membrane production , asphalt heating , drying noodles industries. (1) RY series air-cooled heat conducting oil pump is digesting and absorbing foreign oil pump developed on the basis of the second generation product , the basic structure in the form of single-stage single- suction cantilever leg support structure , imported heat pumps for axial suction , export Center vertically upward , and the motor is mounted on the same base . (2) RY conducting oil pump support takes the form of double-end ball bearing support structure , the front-end lubricating oil , grease lubricated using the backend , the middle of a lead pipe to seal any time to observe the situation and recovery HTF . (3) RY series air-cooled heat conducting oil pump from heat dissipation structure , changing the traditional water cooling structure, the simple structure , small size, save operating costs, better performance, and reliability. (4) RY series air-cooled heat conducting oil pump and mechanical seal packing seal combination in the form filler filler sealed with high temperature , good thermal adaptability, and mechanical seals are made of high mechanical strength , abrasion resistance good carbide materials , ensure the sealing performance under high temperature conditions . (5) RY series air-cooled heat conducting oil pump using third-generation polytetrafluoroethylene ( referred to as PTFE) do lip seal , the seal produced a leap in performance , reliability than rubber seals increased by 25 times , highly corrosion-resistant .
● RY series air-cooled heat conducting oil pump performance range ( according to the design point )
1, flow 1-500m3 / h; 2, lift 10-125m; 3, -20 . C-350. C;
● RY -type air-cooled thermal oil pump performance parameters